Fuel level sensor replacement
Moderators: BeaconMarineBob, Moderator, BeaconMarineDon
Fuel level sensor replacement
I have a 1987 10 meter international and my fuel gages quit working. 1 was ad when I got the boat, the other just stopped this past weekend . I pulled the floor up to get to the tank but really dont have much room from the top of the tank to the floor. Any tips or tricks to make thr job easy? Thanks in advance.
- prowlersfish
- 2025 Gold Support

- Posts: 12744
- Joined: Sat Nov 05, 2005 6:56 pm
- Location: Lower Chesapeake Bay ,Va
Re: Fuel level sensor replacement
Different boat, but I used a hole saw on my F36 I have heard people with 10 meters do the same and put a deck plate in.
Boating is good for the soul
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat
Re: Fuel level sensor replacement
Trojan 10 meter
Same problem
I drilled a hole with a hole saw, saved the core and then repaired.
I have cork decking so repair is not seen
Same problem
I drilled a hole with a hole saw, saved the core and then repaired.
I have cork decking so repair is not seen
10 meter mid cabin
- P-Dogg
- Active User
- Posts: 965
- Joined: Wed Jun 22, 2011 7:15 pm
- Location: Near Baltimorgue, Murderland, where they prove every day that gun control doesn't work.
Re: Fuel level sensor replacement
What makes you think it's the senders?
I needed a less expensive hobby, so I bought a boat!
Re: Fuel level sensor replacement
good point
Marine Parts Source has a good youtube video on how to check the gauge and sending unit
Marine Parts Source has a good youtube video on how to check the gauge and sending unit
10 meter mid cabin